From 2bbb094dd70c65446852825bacb27d7103fe7cb9 Mon Sep 17 00:00:00 2001 From: wangyz1997 Date: Sun, 7 Apr 2024 00:28:05 +0800 Subject: [PATCH] =?UTF-8?q?=E5=A2=9E=E5=8A=A0=E9=87=87=E6=A0=B7=E7=8E=87?= =?UTF-8?q?=E5=8F=AF=E5=8F=98=E5=8A=9F=E8=83=BD?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- .mxproject | 3 + CMakeLists.txt | 10 +- Core/Inc/main.h | 6 +- Core/Src/main.c | 23 +- Drivers/CMakeLists.txt | 12 +- .../Third_Party/EasyLogger/CMakeLists.txt | 2 +- Middlewares/Third_Party/FatFs/CMakeLists.txt | 2 +- .../lvgl/env_support/cmake/custom.cmake | 12 +- .../Third_Party/minimp3/CMakeLists.txt | 2 - User/audio/audio_hal.h | 2 +- User/audio/audio_player_mp3.c | 57 +++++ User/bsp/bsp_aic3204.c | 224 ++++++++++++++++++ User/bsp/bsp_aic3204.h | 10 + User/tasks/task_main.c | 59 ++--- stm32h743_player.ioc | 196 +++++++-------- 15 files changed, 469 insertions(+), 151 deletions(-) create mode 100644 User/bsp/bsp_aic3204.c create mode 100644 User/bsp/bsp_aic3204.h diff --git a/.mxproject b/.mxproject index 47b753b..14bc239 100644 --- a/.mxproject +++ b/.mxproject @@ -6,6 +6,9 @@ SourceFiles=Core\Src\main.c;Core\Src\freertos.c;Core\Src\stm32h7xx_it.c;Core\Src HeaderPath=Drivers\STM32H7xx_HAL_Driver\Inc;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FreeRTOS\Source\include;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;Drivers\CMSIS\Device\ST\STM32H7xx\Include;Drivers\CMSIS\Include;Core\Inc; CDefines=USE_HAL_DRIVER;STM32H743xx;USE_HAL_DRIVER;USE_HAL_DRIVER; +[] +SourceFiles=;; + [PreviousGenFiles] AdvancedFolderStructure=true HeaderFileListSize=4 diff --git a/CMakeLists.txt b/CMakeLists.txt index 2587410..e5b3a82 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.15) +cmake_minimum_required(VERSION 3.22) if(NOT CMAKE_TOOLCHAIN_FILE) set(CMAKE_TOOLCHAIN_FILE ${CMAKE_SOURCE_DIR}/CMake/gcc-arm-none-eabi.cmake) @@ -43,7 +43,7 @@ add_compile_options( # 全局连接器选项 add_link_options( - -Wl,-wrap,_malloc_r -Wl,-wrap,_free_r -Wl,-wrap,_realloc_r # wrap newlib memory allocator functions + -Wl,-wrap,_malloc_r -Wl,-wrap,_free_r -Wl,-wrap,_realloc_r #将newlib所提供的内存管理函数替换为用户自定义的 -T${CMAKE_CURRENT_LIST_DIR}/STM32H743IITX_FLASH.ld ) @@ -69,9 +69,9 @@ target_include_directories(${CMAKE_PROJECT_NAME} PRIVATE ) target_link_libraries(${CMAKE_PROJECT_NAME} PRIVATE - hal_driver - lvgl - lvgl_demos + drivers +# lvgl +# lvgl_demos minimp3 tlsf freertos diff --git a/Core/Inc/main.h b/Core/Inc/main.h index ae619d2..ec3a262 100644 --- a/Core/Inc/main.h +++ b/Core/Inc/main.h @@ -73,8 +73,10 @@ void Error_Handler(void); #define KEY1_GPIO_Port GPIOF #define KEY2_Pin GPIO_PIN_7 #define KEY2_GPIO_Port GPIOF -#define HP_DET_Pin GPIO_PIN_3 -#define HP_DET_GPIO_Port GPIOC +#define CODEC_RST_Pin GPIO_PIN_1 +#define CODEC_RST_GPIO_Port GPIOC +#define CODEC_EN_Pin GPIO_PIN_3 +#define CODEC_EN_GPIO_Port GPIOC #define LED_B_Pin GPIO_PIN_5 #define LED_B_GPIO_Port GPIOA #define LED_G_Pin GPIO_PIN_6 diff --git a/Core/Src/main.c b/Core/Src/main.c index d088547..fdee18b 100644 --- a/Core/Src/main.c +++ b/Core/Src/main.c @@ -283,7 +283,7 @@ static void MX_I2C1_Init(void) /* USER CODE END I2C1_Init 1 */ hi2c1.Instance = I2C1; - hi2c1.Init.Timing = 0x307077B2; + hi2c1.Init.Timing = 0x00B03FDB; hi2c1.Init.OwnAddress1 = 0; hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; @@ -298,7 +298,7 @@ static void MX_I2C1_Init(void) /** Configure Analogue filter */ - if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_DISABLE) != HAL_OK) + if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK) { Error_Handler(); } @@ -565,6 +565,9 @@ static void MX_GPIO_Init(void) __HAL_RCC_GPIOG_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOC, CODEC_RST_Pin|CODEC_EN_Pin, GPIO_PIN_RESET); + /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(GPIOA, LED_B_Pin|LED_G_Pin, GPIO_PIN_SET); @@ -625,11 +628,19 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Alternate = GPIO_AF14_LTDC; HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); - /*Configure GPIO pin : HP_DET_Pin */ - GPIO_InitStruct.Pin = HP_DET_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + /*Configure GPIO pin : CODEC_RST_Pin */ + GPIO_InitStruct.Pin = CODEC_RST_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; - HAL_GPIO_Init(HP_DET_GPIO_Port, &GPIO_InitStruct); + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(CODEC_RST_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : CODEC_EN_Pin */ + GPIO_InitStruct.Pin = CODEC_EN_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(CODEC_EN_GPIO_Port, &GPIO_InitStruct); /*Configure GPIO pin : PA2 */ GPIO_InitStruct.Pin = GPIO_PIN_2; diff --git a/Drivers/CMakeLists.txt b/Drivers/CMakeLists.txt index 8087399..30393a6 100644 --- a/Drivers/CMakeLists.txt +++ b/Drivers/CMakeLists.txt @@ -1,12 +1,16 @@ -set(SOURCE_DIRS +cmake_minimum_required(VERSION 3.22) + +project(drivers) + +set(DRIVERS_SOURCE_DIRS "${CMAKE_CURRENT_LIST_DIR}/STM32H7xx_HAL_Driver/Src/*.c" ) -file(GLOB SOURCE_FILES ${SOURCE_DIRS}) +file(GLOB DRIVERS_SOURCE_FILES ${DRIVERS_SOURCE_DIRS}) -add_library(hal_driver ${SOURCE_FILES}) +add_library(drivers ${DRIVERS_SOURCE_FILES}) -target_include_directories(hal_driver PUBLIC +target_include_directories(drivers PUBLIC "${CMAKE_CURRENT_LIST_DIR}/STM32H7xx_HAL_Driver/Inc" "${CMAKE_CURRENT_LIST_DIR}/STM32H7xx_HAL_Driver/Inc/Legacy" ) diff --git a/Middlewares/Third_Party/EasyLogger/CMakeLists.txt b/Middlewares/Third_Party/EasyLogger/CMakeLists.txt index 7e6c5da..56a03d1 100644 --- a/Middlewares/Third_Party/EasyLogger/CMakeLists.txt +++ b/Middlewares/Third_Party/EasyLogger/CMakeLists.txt @@ -15,6 +15,6 @@ target_include_directories(easylogger PUBLIC ) target_link_libraries(easylogger PRIVATE - hal_driver + drivers freertos ) diff --git a/Middlewares/Third_Party/FatFs/CMakeLists.txt b/Middlewares/Third_Party/FatFs/CMakeLists.txt index 3eba6dd..1548d4a 100644 --- a/Middlewares/Third_Party/FatFs/CMakeLists.txt +++ b/Middlewares/Third_Party/FatFs/CMakeLists.txt @@ -9,6 +9,6 @@ target_include_directories(fatfs PUBLIC ) target_link_libraries(fatfs PRIVATE - hal_driver + drivers freertos ) diff --git a/Middlewares/Third_Party/lvgl/env_support/cmake/custom.cmake b/Middlewares/Third_Party/lvgl/env_support/cmake/custom.cmake index 1536710..3e50c5f 100644 --- a/Middlewares/Third_Party/lvgl/env_support/cmake/custom.cmake +++ b/Middlewares/Third_Party/lvgl/env_support/cmake/custom.cmake @@ -15,7 +15,7 @@ get_filename_component(LV_CONF_DIR ${LV_CONF_PATH} DIRECTORY) option(BUILD_SHARED_LIBS "Build shared libraries" OFF) file(GLOB_RECURSE SOURCES ${LVGL_ROOT_DIR}/src/*.c) -file(GLOB_RECURSE EXAMPLE_SOURCES ${LVGL_ROOT_DIR}/examples/*.c) +# file(GLOB_RECURSE EXAMPLE_SOURCES ${LVGL_ROOT_DIR}/examples/*.c) file(GLOB_RECURSE DEMO_SOURCES ${LVGL_ROOT_DIR}/demos/*.c) if (BUILD_SHARED_LIBS) @@ -25,8 +25,8 @@ else() endif() add_library(lvgl::lvgl ALIAS lvgl) -add_library(lvgl_examples STATIC ${EXAMPLE_SOURCES}) -add_library(lvgl::examples ALIAS lvgl_examples) +# add_library(lvgl_examples STATIC ${EXAMPLE_SOURCES}) +# add_library(lvgl::examples ALIAS lvgl_examples) add_library(lvgl_demos STATIC ${DEMO_SOURCES}) add_library(lvgl::demos ALIAS lvgl_demos) @@ -38,12 +38,12 @@ target_compile_definitions( target_include_directories(lvgl SYSTEM PUBLIC ${LVGL_ROOT_DIR} ${LV_CONF_DIR}) # Include /examples folder -target_include_directories(lvgl_examples SYSTEM - PUBLIC ${LVGL_ROOT_DIR}/examples) +# target_include_directories(lvgl_examples SYSTEM +# PUBLIC ${LVGL_ROOT_DIR}/examples) target_include_directories(lvgl_demos SYSTEM PUBLIC ${LVGL_ROOT_DIR}/demos) -target_link_libraries(lvgl_examples PUBLIC lvgl) +# target_link_libraries(lvgl_examples PUBLIC lvgl) target_link_libraries(lvgl_demos PUBLIC lvgl) # Lbrary and headers can be installed to system using make install diff --git a/Middlewares/Third_Party/minimp3/CMakeLists.txt b/Middlewares/Third_Party/minimp3/CMakeLists.txt index c063e7f..86f1a36 100644 --- a/Middlewares/Third_Party/minimp3/CMakeLists.txt +++ b/Middlewares/Third_Party/minimp3/CMakeLists.txt @@ -2,8 +2,6 @@ cmake_minimum_required(VERSION 3.22) add_library(minimp3 INTERFACE) -enable_language(C) - target_include_directories(minimp3 INTERFACE "${CMAKE_CURRENT_LIST_DIR}" ) diff --git a/User/audio/audio_hal.h b/User/audio/audio_hal.h index dec380b..a06c983 100644 --- a/User/audio/audio_hal.h +++ b/User/audio/audio_hal.h @@ -3,7 +3,7 @@ #include "main.h" -#define AUDIO_HAL_SAMPLE_QUEUE_SIZE 3 +#define AUDIO_HAL_SAMPLE_QUEUE_SIZE 5 void audio_hal_start(uint32_t sample_count, uint8_t sample_size); void audio_hal_stop(void); diff --git a/User/audio/audio_player_mp3.c b/User/audio/audio_player_mp3.c index f0db102..17a2302 100644 --- a/User/audio/audio_player_mp3.c +++ b/User/audio/audio_player_mp3.c @@ -6,6 +6,7 @@ #include "queue.h" #include "elog.h" #include "heap.h" +#include "bsp_aic3204.h" #define MINIMP3_IMPLEMENTATION #include "minimp3.h" @@ -86,6 +87,62 @@ void music_mp3_play(const char *file_name) } break; } + + if (HAL_GPIO_ReadPin(KEY1_GPIO_Port, KEY1_Pin) == GPIO_PIN_RESET) { + vTaskDelay(pdMS_TO_TICKS(100)); + static uint8_t samplerate = 0; + + switch (samplerate) { + case 0: + bsp_aic3204_set_fs(&hi2c1, 8000); + break; + case 1: + bsp_aic3204_set_fs(&hi2c1, 11025); + break; + case 2: + bsp_aic3204_set_fs(&hi2c1, 12000); + break; + case 3: + bsp_aic3204_set_fs(&hi2c1, 16000); + break; + case 4: + bsp_aic3204_set_fs(&hi2c1, 22050); + break; + case 5: + bsp_aic3204_set_fs(&hi2c1, 24000); + break; + case 6: + bsp_aic3204_set_fs(&hi2c1, 32000); + break; + case 7: + bsp_aic3204_set_fs(&hi2c1, 44100); + break; + case 8: + bsp_aic3204_set_fs(&hi2c1, 48000); + break; + case 9: + bsp_aic3204_set_fs(&hi2c1, 88200); + break; + case 10: + bsp_aic3204_set_fs(&hi2c1, 96000); + break; + case 11: + bsp_aic3204_set_fs(&hi2c1, 176400); + break; + case 12: + bsp_aic3204_set_fs(&hi2c1, 192000); + break; + } + + samplerate ++; + if (samplerate >= 13) { + samplerate = 0; + } + + while (HAL_GPIO_ReadPin(KEY1_GPIO_Port, KEY1_Pin) == GPIO_PIN_RESET) { + vTaskDelay(pdMS_TO_TICKS(1)); + } + } } /* 关闭文件 */ diff --git a/User/bsp/bsp_aic3204.c b/User/bsp/bsp_aic3204.c new file mode 100644 index 0000000..a629aa8 --- /dev/null +++ b/User/bsp/bsp_aic3204.c @@ -0,0 +1,224 @@ +#include "bsp_aic3204.h" +#include "FreeRTOS.h" +#include "task.h" +#include "elog.h" + +static const char *TAG = "bsp_aic3204"; + +#define BSP_AIC3204_I2C_ADDR 0x30 + +HAL_StatusTypeDef bsp_aic3204_write_reg(I2C_HandleTypeDef *hi2c, uint8_t reg_addr, uint8_t reg_value) +{ + HAL_StatusTypeDef status = HAL_I2C_Mem_Write(hi2c, BSP_AIC3204_I2C_ADDR, reg_addr, 1, ®_value, 1, 100); + + if (status == HAL_OK) { + elog_debug(TAG, "write register 0x%02X@0x%02X success", reg_value, reg_addr); + } else { + elog_error(TAG, "write register 0x%02X@0x%02X failed", reg_value, reg_addr); + } + + return status; +} + +HAL_StatusTypeDef bsp_aic3204_read_reg(I2C_HandleTypeDef *hi2c, uint8_t reg_addr, uint8_t *reg_value_out) +{ + HAL_StatusTypeDef status = HAL_I2C_Mem_Read(hi2c, BSP_AIC3204_I2C_ADDR, reg_addr, 1, reg_value_out, 1, 10); + + if (status == HAL_OK) { + elog_debug(TAG, "read register 0x%02X@0x%02X success", *reg_value_out, reg_addr); + } else { + elog_error(TAG, "read register @0x%02X failed", reg_addr); + } + + return status; +} + +HAL_StatusTypeDef bsp_aic3204_set_fs(I2C_HandleTypeDef *hi2c, uint32_t fs_hz) +{ + uint16_t n_dac; + uint16_t pll_j, pll_d; + uint16_t prb_no; + + switch (fs_hz) { + case 11025: + case 22050: + case 44100: + case 88200: + case 176400: + pll_j = 7; + pll_d = 3500; //PLL输出的时钟频率CODEC_CLKIN=11.2896MHz*8 + n_dac = (8 * 4) / (fs_hz / 11025); + break; + case 12000: + case 24000: + case 48000: + case 96000: + case 192000: + pll_j = 8; + pll_d = 0; //PLL输出的时钟频率CODEC_CLKIN=12.288MHz*8 + n_dac = (8 * 4) / (fs_hz / 12000); + break; + case 8000: + case 16000: + case 32000: + pll_j = 8; + pll_d = 0; //PLL输出的时钟频率CODEC_CLKIN=12.288MHz*8 + /* PLL输出的时钟频率CODEC_CLKIN=11.2896MHz*8 */ + n_dac = (8 * 6) / (fs_hz / 8000); + break; + default: + elog_error(TAG, "bsp_aic3204_set_fs: unsupported sample rate: %dHz", fs_hz); + return HAL_ERROR; + } + + if (fs_hz <= 48000) { + prb_no = 1; + } else if (fs_hz <= 96000) { + prb_no = 9; + } else { + prb_no = 19; + } + + // 设置PLL_J + bsp_aic3204_write_reg(hi2c, 0x06, pll_j); + // 设置PLL_D + bsp_aic3204_write_reg(hi2c, 0x07, pll_d >> 8); + bsp_aic3204_write_reg(hi2c, 0x08, pll_d & 0xFF); + // 启动NDAC分频器并设置分频值 + bsp_aic3204_write_reg(hi2c, 0x0b, 0x80 | n_dac); + // 设置DAC信号处理块(PRB) + bsp_aic3204_write_reg(hi2c, 0x3C, prb_no); + + elog_info(TAG, "bsp_aic3204_set_fs: sample rate: %dHz, NDAC=%d, PLL J.D=%d.%d", fs_hz, n_dac, pll_j, pll_d); + return HAL_OK; +} + +HAL_StatusTypeDef bsp_aic3204_init(I2C_HandleTypeDef *hi2c) +{ + // 选择寄存器页0 + // bsp_aic3204_write_reg(hi2c, 0x00, 0x00); + // 软件复位芯片 + // bsp_aic3204_write_reg(hi2c, 0x01, 0x01); + + // 硬件复位芯片 + HAL_GPIO_WritePin(CODEC_RST_GPIO_Port, CODEC_RST_Pin, GPIO_PIN_RESET); + vTaskDelay(pdMS_TO_TICKS(10)); + HAL_GPIO_WritePin(CODEC_RST_GPIO_Port, CODEC_RST_Pin, GPIO_PIN_SET); + vTaskDelay(pdMS_TO_TICKS(10)); + + /* + * 时钟结构 + * PLL_CLKIN PLL_CLK /NDAC /MDAC /DOSR + * MFP5 -----------> PLL ---------> CODEC_CLKIN -------> DAC_CLK -------> DAC_MOD_CLK -------> DAC_FS + * | + * -------------> BCLK -----------------------> WCLK + * /BDIV_CLKIN /SAMPLE_BITS/CHANNELS + * + * 举例如下 + * /1 /2 /128 + * MFP5 ----> CODEC_CLKIN ----> DAC_CLK ----> DAC_MOD_CLK ------> DAC_FS + * 12.288MHz 12.288MHz 6.144MHz 48kHz + * | + * ----> BCLK -------> WCLK + * /8 1.536MHz /16/2 48kHz + * + * BDIV_CLKIN = MDAC * DOSR / SAMPLE_BITS / CHANNELS + */ + + /* + uint16_t n_dac = 1; + uint16_t m_dac = 2; + uint16_t dac_osr = 128; + uint16_t bdiv_clkin = m_dac * dac_osr / 16 / 2; + + // 选择寄存器页0 + bsp_aic3204_write_reg(hi2c, 0x00, 0x00); + // MFP5用于时钟输入 + bsp_aic3204_write_reg(hi2c, 0x34, 0x04); + // 选择GPIO输入为Codec主时钟源 + bsp_aic3204_write_reg(hi2c, 0x04, 0x02); + // 启动NDAC分频器并设置分频值为1 + bsp_aic3204_write_reg(hi2c, 0x0b, 0x80 | n_dac); + // 启动MDAC分频器并设置分频值为2 + bsp_aic3204_write_reg(hi2c, 0x0c, 0x80 | m_dac); + // 设置DAC的超采样率(OSR)为128 + bsp_aic3204_write_reg(hi2c, 0x0d, (dac_osr >> 8) & 0x03); + bsp_aic3204_write_reg(hi2c, 0x0e, dac_osr & 0xFF); + // 总线类型I2S 数据长度16位 BCLK方向为输出 WCLK方向为输出 + bsp_aic3204_write_reg(hi2c, 0x1b, 0x0D); + // 设置DAC信号处理块(PRB)为PRB_1 + bsp_aic3204_write_reg(hi2c, 0x3c, 0x01); + // 选择DAC_CLK做为BDIV_CLKIN + bsp_aic3204_write_reg(hi2c, 0x1D, 0x00); + // 启用对外WCLK与BCLK时钟输出 CODEC_CLKIN与BCLK的商为每个采样的大小 即声道数与DAC位数的乘积 + bsp_aic3204_write_reg(hi2c, 0x1E, 0x80 | bdiv_clkin); + */ + + // 选择寄存器页0 + bsp_aic3204_write_reg(hi2c, 0x00, 0x00); + // MFP5用于时钟输入 + bsp_aic3204_write_reg(hi2c, 0x34, 0x04); + // 选择GPIO输入为PLL时钟源 选择PLL输出为Codec主时钟源 + bsp_aic3204_write_reg(hi2c, 0x04, 0x02 << 2 | 0x03 << 0); + // 启动PLL并设置PLL_P=1 PLL_R=1 + bsp_aic3204_write_reg(hi2c, 0x05, 0x80 | 1 << 4 | 1 << 0); + // 设置PLL_J=7 + bsp_aic3204_write_reg(hi2c, 0x06, 0x07); + // 设置PLL_D=3500 + bsp_aic3204_write_reg(hi2c, 0x07, 3500 >> 8); + bsp_aic3204_write_reg(hi2c, 0x08, 3500 & 0xFF); + // 启动NDAC分频器并设置分频值为8 + bsp_aic3204_write_reg(hi2c, 0x0B, 0x80 | 8); + // 启动MDAC分频器并设置分频值为2 + bsp_aic3204_write_reg(hi2c, 0x0C, 0x80 | 2); + // 设置DAC的超采样率(OSR)为128 + bsp_aic3204_write_reg(hi2c, 0x0D, 128 >> 8); + bsp_aic3204_write_reg(hi2c, 0x0E, 128 & 0xFF); + // 总线类型I2S 数据长度16位 BCLK方向为输出 WCLK方向为输出 + bsp_aic3204_write_reg(hi2c, 0x1B, 0x0D); + // 选择DAC_CLK做为BDIV_CLKIN + bsp_aic3204_write_reg(hi2c, 0x1D, 0x00); + // 启用对外WCLK与BCLK时钟输出 CODEC_CLKIN与BCLK的商为每个采样的大小 即声道数与DAC位数的乘积 + bsp_aic3204_write_reg(hi2c, 0x1E, 0x80 | 8); + // 设置DAC信号处理块(PRB)为PRB_1 + bsp_aic3204_write_reg(hi2c, 0x3C, 1); + + // 选择寄存器页1 + bsp_aic3204_write_reg(hi2c, 0x00, 0x01); + // 关闭内部AVDD微供电 + bsp_aic3204_write_reg(hi2c, 0x01, 0x08); + // 内部LDO上电 DVDD=1.72V AVDD=1.72V + bsp_aic3204_write_reg(hi2c, 0x02, 0x01); + // Set the REF charging time to 40ms + bsp_aic3204_write_reg(hi2c, 0x7b, 0x01); + // HP soft stepping settings for optimal pop performance at power up + // Rpop used is 6k with N = 6 and soft step = 20usec. This should work with 47uF coupling capacitor. + // Can try N=5,6 or 7 time constants as well. Trade-off delay vs “pop” sound. + bsp_aic3204_write_reg(hi2c, 0x14, 0x25); + // Set the Input Common Mode to 0.9V and Output Common Mode for Headphone to Input Common Mode + bsp_aic3204_write_reg(hi2c, 0x0A, 0x00); + // Route Left DAC to HPL + bsp_aic3204_write_reg(hi2c, 0x0c, 0x08); + // Route Right DAC to HPR + bsp_aic3204_write_reg(hi2c, 0x0d, 0x08); + // Set the DAC PTM mode to PTM_P3/4 + bsp_aic3204_write_reg(hi2c, 0x03, 0x00); + bsp_aic3204_write_reg(hi2c, 0x04, 0x00); + // Set the HPL gain to 0dB + bsp_aic3204_write_reg(hi2c, 0x10, 0x00); + // Set the HPR gain to 0dB + bsp_aic3204_write_reg(hi2c, 0x11, 0x00); + // Power up HPL and HPR drivers + bsp_aic3204_write_reg(hi2c, 0x09, 0x30); + // Wait for 2.5 sec for soft stepping to take effect + vTaskDelay(pdMS_TO_TICKS(1000)); + + // 选择寄存器页0 + bsp_aic3204_write_reg(hi2c, 0x00, 0x00); + // Power up the Left and Right DAC Channels with route the Left Audio digital data to Left Channel DAC and Right Audio digital data to Right Channel DAC + bsp_aic3204_write_reg(hi2c, 0x3f, 0xd6); + // Unmute the DAC digital volume control + bsp_aic3204_write_reg(hi2c, 0x40, 0x00); + + return HAL_OK; +} diff --git a/User/bsp/bsp_aic3204.h b/User/bsp/bsp_aic3204.h new file mode 100644 index 0000000..3673978 --- /dev/null +++ b/User/bsp/bsp_aic3204.h @@ -0,0 +1,10 @@ +#ifndef __BSP_AIC3204_H +#define __BSP_AIC3204_H + +#include "main.h" + +HAL_StatusTypeDef bsp_aic3204_init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef bsp_aic3204_write_reg(I2C_HandleTypeDef *hi2c, uint8_t reg_addr, uint8_t reg_value); +HAL_StatusTypeDef bsp_aic3204_set_fs(I2C_HandleTypeDef *hi2c, uint32_t fs_hz); + +#endif diff --git a/User/tasks/task_main.c b/User/tasks/task_main.c index 37bca5c..4d00c4e 100644 --- a/User/tasks/task_main.c +++ b/User/tasks/task_main.c @@ -8,7 +8,7 @@ #include "main.h" #include "ff.h" #include "audio_player_mp3.h" -#include "bsp_wm8904.h" +#include "bsp_aic3204.h" // #include "lvgl.h" // #include "lv_demos.h" // #include "lv_port_disp.h" @@ -91,27 +91,27 @@ void util_i2c_scan(I2C_HandleTypeDef *hi2c) // uint8_t *sdram_ptr = (uint8_t *)SDRAM_BANK_ADDR; -void codec_init(void) -{ - uint8_t retries = 0; - while (1) { - if (WM8904_Init(&hi2c1) == HAL_OK) { - break; - } +// void codec_init(void) +// { +// uint8_t retries = 0; +// while (1) { +// if (WM8904_Init(&hi2c1) == HAL_OK) { +// break; +// } - HAL_I2C_DeInit(&hi2c1); - vTaskDelay(pdMS_TO_TICKS(200)); - HAL_I2C_Init(&hi2c1); +// HAL_I2C_DeInit(&hi2c1); +// vTaskDelay(pdMS_TO_TICKS(200)); +// HAL_I2C_Init(&hi2c1); - retries ++; - if (retries > 10) { - elog_assert(TAG, "wm8904 configuration failed"); - while (1) { - vTaskDelay(1); - } - } - } -} +// retries ++; +// if (retries > 10) { +// elog_assert(TAG, "wm8904 configuration failed"); +// while (1) { +// vTaskDelay(1); +// } +// } +// } +// } void task_main_entry(void *param) { @@ -119,7 +119,7 @@ void task_main_entry(void *param) // lv_port_disp_init(); // lv_demo_music(); - task_debug_create(NULL); + // task_debug_create(NULL); // FMC_SDRAM_CommandTypeDef command; // SDRAM_Initialization_Sequence(&hsdram1, &command); @@ -144,16 +144,17 @@ void task_main_entry(void *param) } // util_i2c_scan(&hi2c1); - - if (HAL_GPIO_ReadPin(KEY1_GPIO_Port, KEY1_Pin) == GPIO_PIN_RESET) { - codec_init(); - } + HAL_GPIO_WritePin(CODEC_EN_GPIO_Port, CODEC_EN_Pin, GPIO_PIN_SET); + vTaskDelay(20); + bsp_aic3204_init(&hi2c1); while (1) { - music_mp3_play("/V.A. - 花手纸.mp3"); - music_mp3_play("黒兎ウル - 四季刻歌.mp3"); - music_mp3_play("/堀江由衣 - silky heart.mp3"); - music_mp3_play("/MUSIC1.mp3"); + music_mp3_play("夏川椎菜 - No.1.mp3"); + music_mp3_play("HoneyWorks,早見沙織 - 可愛くてごめん.mp3"); + music_mp3_play("堀江由衣 - silky heart.mp3"); + music_mp3_play("Candy_Wind - Go For The Next ！.mp3"); + music_mp3_play("July - Somewhere.mp3"); + music_mp3_play("Wiz Khalifa; Charlie Puth - See You Again.mp3"); } } diff --git a/stm32h743_player.ioc b/stm32h743_player.ioc index c385d76..2d377fe 100644 --- a/stm32h743_player.ioc +++ b/stm32h743_player.ioc @@ -107,10 +107,10 @@ FREERTOS.configUSE_TRACE_FACILITY=1 FREERTOS.copyHeapFile=0 File.Version=6 GPIO.groupedBy=Group By Peripherals -I2C1.Analog_Filter=I2C_ANALOGFILTER_DISABLE -I2C1.I2C_Speed_Mode=I2C_Standard +I2C1.Analog_Filter=I2C_ANALOGFILTER_ENABLE +I2C1.I2C_Speed_Mode=I2C_Fast I2C1.IPParameters=Timing,I2C_Speed_Mode,Analog_Filter -I2C1.Timing=0x307077B2 +I2C1.Timing=0x00B03FDB KeepUserPlacement=false Mcu.CPN=STM32H743IIT6 Mcu.Family=STM32H7 @@ -133,14 +133,15 @@ Mcu.Package=LQFP176 Mcu.Pin0=PE2 Mcu.Pin1=PE3 Mcu.Pin10=PF1 -Mcu.Pin100=PI4 -Mcu.Pin101=PI5 -Mcu.Pin102=PI6 -Mcu.Pin103=PI7 -Mcu.Pin104=VP_FREERTOS_VS_CMSIS_V1 -Mcu.Pin105=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC -Mcu.Pin106=VP_SYS_VS_tim6 -Mcu.Pin107=VP_TIM2_VS_ClockSourceINT +Mcu.Pin100=PE1 +Mcu.Pin101=PI4 +Mcu.Pin102=PI5 +Mcu.Pin103=PI6 +Mcu.Pin104=PI7 +Mcu.Pin105=VP_FREERTOS_VS_CMSIS_V1 +Mcu.Pin106=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC +Mcu.Pin107=VP_SYS_VS_tim6 +Mcu.Pin108=VP_TIM2_VS_ClockSourceINT Mcu.Pin11=PF2 Mcu.Pin12=PF3 Mcu.Pin13=PF4 @@ -153,92 +154,92 @@ Mcu.Pin19=PF10 Mcu.Pin2=PE5 Mcu.Pin20=PH0-OSC_IN (PH0) Mcu.Pin21=PH1-OSC_OUT (PH1) -Mcu.Pin22=PC3_C -Mcu.Pin23=PA2 -Mcu.Pin24=PH2 -Mcu.Pin25=PH3 -Mcu.Pin26=PH5 -Mcu.Pin27=PA5 -Mcu.Pin28=PA6 -Mcu.Pin29=PC4 +Mcu.Pin22=PC1 +Mcu.Pin23=PC3_C +Mcu.Pin24=PA2 +Mcu.Pin25=PH2 +Mcu.Pin26=PH3 +Mcu.Pin27=PH5 +Mcu.Pin28=PA5 +Mcu.Pin29=PA6 Mcu.Pin3=PE6 -Mcu.Pin30=PB2 -Mcu.Pin31=PF11 -Mcu.Pin32=PF12 -Mcu.Pin33=PF13 -Mcu.Pin34=PF14 -Mcu.Pin35=PF15 -Mcu.Pin36=PG0 -Mcu.Pin37=PG1 -Mcu.Pin38=PE7 -Mcu.Pin39=PE8 +Mcu.Pin30=PC4 +Mcu.Pin31=PB2 +Mcu.Pin32=PF11 +Mcu.Pin33=PF12 +Mcu.Pin34=PF13 +Mcu.Pin35=PF14 +Mcu.Pin36=PF15 +Mcu.Pin37=PG0 +Mcu.Pin38=PG1 +Mcu.Pin39=PE7 Mcu.Pin4=PC14-OSC32_IN (OSC32_IN) -Mcu.Pin40=PE9 -Mcu.Pin41=PE10 -Mcu.Pin42=PE11 -Mcu.Pin43=PE12 -Mcu.Pin44=PE13 -Mcu.Pin45=PE14 -Mcu.Pin46=PE15 -Mcu.Pin47=PH6 -Mcu.Pin48=PH7 -Mcu.Pin49=PH8 +Mcu.Pin40=PE8 +Mcu.Pin41=PE9 +Mcu.Pin42=PE10 +Mcu.Pin43=PE11 +Mcu.Pin44=PE12 +Mcu.Pin45=PE13 +Mcu.Pin46=PE14 +Mcu.Pin47=PE15 +Mcu.Pin48=PH6 +Mcu.Pin49=PH7 Mcu.Pin5=PC15-OSC32_OUT (OSC32_OUT) -Mcu.Pin50=PH9 -Mcu.Pin51=PH10 -Mcu.Pin52=PH11 -Mcu.Pin53=PH12 -Mcu.Pin54=PD8 -Mcu.Pin55=PD9 -Mcu.Pin56=PD10 -Mcu.Pin57=PD11 -Mcu.Pin58=PD12 -Mcu.Pin59=PD13 +Mcu.Pin50=PH8 +Mcu.Pin51=PH9 +Mcu.Pin52=PH10 +Mcu.Pin53=PH11 +Mcu.Pin54=PH12 +Mcu.Pin55=PD8 +Mcu.Pin56=PD9 +Mcu.Pin57=PD10 +Mcu.Pin58=PD11 +Mcu.Pin59=PD12 Mcu.Pin6=PI9 -Mcu.Pin60=PD14 -Mcu.Pin61=PD15 -Mcu.Pin62=PG2 -Mcu.Pin63=PG3 -Mcu.Pin64=PG4 -Mcu.Pin65=PG5 -Mcu.Pin66=PG6 -Mcu.Pin67=PG7 -Mcu.Pin68=PG8 -Mcu.Pin69=PC8 +Mcu.Pin60=PD13 +Mcu.Pin61=PD14 +Mcu.Pin62=PD15 +Mcu.Pin63=PG2 +Mcu.Pin64=PG3 +Mcu.Pin65=PG4 +Mcu.Pin66=PG5 +Mcu.Pin67=PG6 +Mcu.Pin68=PG7 +Mcu.Pin69=PG8 Mcu.Pin7=PI10 -Mcu.Pin70=PC9 -Mcu.Pin71=PA8 -Mcu.Pin72=PA9 -Mcu.Pin73=PA10 -Mcu.Pin74=PA11 -Mcu.Pin75=PA12 -Mcu.Pin76=PA13 (JTMS/SWDIO) -Mcu.Pin77=PH13 -Mcu.Pin78=PH14 -Mcu.Pin79=PH15 +Mcu.Pin70=PC8 +Mcu.Pin71=PC9 +Mcu.Pin72=PA8 +Mcu.Pin73=PA9 +Mcu.Pin74=PA10 +Mcu.Pin75=PA11 +Mcu.Pin76=PA12 +Mcu.Pin77=PA13 (JTMS/SWDIO) +Mcu.Pin78=PH13 +Mcu.Pin79=PH14 Mcu.Pin8=PI11 -Mcu.Pin80=PI0 -Mcu.Pin81=PI2 -Mcu.Pin82=PA14 (JTCK/SWCLK) -Mcu.Pin83=PC10 -Mcu.Pin84=PC11 -Mcu.Pin85=PC12 -Mcu.Pin86=PD0 -Mcu.Pin87=PD1 -Mcu.Pin88=PD2 -Mcu.Pin89=PD6 +Mcu.Pin80=PH15 +Mcu.Pin81=PI0 +Mcu.Pin82=PI2 +Mcu.Pin83=PA14 (JTCK/SWCLK) +Mcu.Pin84=PC10 +Mcu.Pin85=PC11 +Mcu.Pin86=PC12 +Mcu.Pin87=PD0 +Mcu.Pin88=PD1 +Mcu.Pin89=PD2 Mcu.Pin9=PF0 -Mcu.Pin90=PG12 -Mcu.Pin91=PG13 -Mcu.Pin92=PG14 -Mcu.Pin93=PG15 -Mcu.Pin94=PB3 (JTDO/TRACESWO) -Mcu.Pin95=PB6 -Mcu.Pin96=PB8 -Mcu.Pin97=PB9 -Mcu.Pin98=PE0 -Mcu.Pin99=PE1 -Mcu.PinsNb=108 +Mcu.Pin90=PD6 +Mcu.Pin91=PG12 +Mcu.Pin92=PG13 +Mcu.Pin93=PG14 +Mcu.Pin94=PG15 +Mcu.Pin95=PB3 (JTDO/TRACESWO) +Mcu.Pin96=PB6 +Mcu.Pin97=PB8 +Mcu.Pin98=PB9 +Mcu.Pin99=PE0 +Mcu.PinsNb=109 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32H743IITx @@ -339,6 +340,13 @@ PB9.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH PB9.Locked=true PB9.Mode=I2C PB9.Signal=I2C1_SDA +PC1.GPIOParameters=PinState,GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultOutputPP +PC1.GPIO_Label=CODEC_RST +PC1.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP +PC1.GPIO_PuPd=GPIO_PULLUP +PC1.Locked=true +PC1.PinState=GPIO_PIN_RESET +PC1.Signal=GPIO_Output PC10.Locked=true PC10.Mode=SD_4_bits_Wide_bus PC10.Signal=SDMMC1_D2 @@ -352,11 +360,11 @@ PC14-OSC32_IN\ (OSC32_IN).Locked=true PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN PC15-OSC32_OUT\ (OSC32_OUT).Locked=true PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT -PC3_C.GPIOParameters=GPIO_PuPd,GPIO_Label -PC3_C.GPIO_Label=HP_DET -PC3_C.GPIO_PuPd=GPIO_PULLUP +PC3_C.GPIOParameters=GPIO_Speed,GPIO_Label +PC3_C.GPIO_Label=CODEC_EN +PC3_C.GPIO_Speed=GPIO_SPEED_FREQ_LOW PC3_C.Locked=true -PC3_C.Signal=GPIO_Input +PC3_C.Signal=GPIO_Output PC4.GPIOParameters=GPIO_Speed,PinState,GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultOutputPP PC4.GPIO_Label=LED_R PC4.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD